2.2 Feed Drive System
2.2.1 Overview
The finisher is designed to operate according to the commands from its host machine to deliver arriving copies to
trays in the appropriate mode: simple stacking, job offset, stapling.
There are three delivery methods.
2.2.2 Constraction of the Control System
The copy sent from the host machine is delivered to the ejection tray or processing tray according to the ejection type.
Job offset or stapling is performed, according to the instruction from the host machine, for copy delivered to the
Method of delivery
Normal delivery tray
Normal delivery tray
Normal
Simple stacking
delivery
Stack job offset
Staple
Front 1-point stapling
Rear 1-point stapling
2-point stapling
F-2-3
F-2-4
Chapter 2
0004-4413
0004-4426
2-3