Feed Drive System; Outline; Outline - Canon STAPLER SORTER-L1/MS-C1 Service Manual

III. FEED DRIVE SYSTEM
A. Outline
Basic construction of the feed system is shown in Figure 2-301.
The feed system moves the copies from the copier to the bins by its feed roller. The feed roller
is driven with the feed motor (M2).
Copy feed condition is detected with the paper detection sensor (PI5)on the sorter controller
circuit PCB.
COPYRIGHT © 1998 CANON INC. CANON STAPLER SOTRER-L1 MS-C1 REV.0 NOV. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
PI5
Paper detection sensor
Figure 2-301
CHAPTER 2 OPERATIONS AND TIMING
Paper detection signal
Feed motor drive signal
M2
Feed motor
2-19