Feeding Drive System; Intermediary Processing - Canon FINISJER-E1 Service Manual

III. FEEDING DRIVE SYSTEM
A. Outline
Paper coming from the copier is sent to the intermediary processing tray, on which it is put into
order and offset/stapled for delivery to the stack tray.
The machine detects jams using the inlet sensor (S2).
Figure 2-301 shows the construction of the feeding drive system.
Feeding guide A
Returning roller

Intermediary processing

tray auxiliary plate
Stack delivery lever
COPYRIGHT © 1999 CANON INC.
Notation
M1 Delivery motor
M2 Stack processing motor
S1 Delivery motor clock sensor
S2 Inlet sensor
S5 Intermediary processing tray paper sensor
Table 2-301
Feeding guide B
Figure 2-301
CANON FINISHER-E1 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 2 BASIC OPERATION
Name
S1
M1
Delivery roller
One-way clutch
J10-3
S1D
J4
J11-18
S2D J5
M2
J9-9
S5D
2-9