Hot Plug Compatible Sata/Sas Drive Led; Optical Disk Drive Access Led (Optional) - NEC Express5800 Series User Manual

Chapter 1 General Description
4.8.4

Hot plug compatible SATA/SAS drive LED

No.
1 Position Check LED
2 DISK ACT LED
3 Remove Protect Switch/LED
4 DISK STATUS LED
4.8.5

Optical Disk Drive Access LED (optional)

The LED for optical disk drive at the front of the server flashes when a CD or DVD is being accessed.
42
Item Status
Lights in blue
Flashes in blue
Rotates in green
Lights off
Lights in white
Lights off
Lights in green
Flashes in green
Flashes in
amber/green.
Flashes in amber
Lights in amber
Lights off
Important
Observe the following precautions whenever you use the auto rebuilding
feature
Do not turn off or reboot the server while a HDD is being rebuilt.
●
Wait for at least 90 seconds while a HDD is being rebuilt.
●
Do not replace a HDD while another HDD is being rebuilt.
●
Express5800/R120h-1E User's Guide
4. Names and Functions of Parts
Description
The drive is identified by the host application
Firmware on the drive carrier is being
updated or requires updating
Drive is working
Drive is not working
Do not remove the drive. Removing a drive
causes one or more logical drives to fail.
Even if the drive is removed, the logical drive
will not fail.
A drive is a member of one or more logical
drives.
Rebuilding the drive, migrating RAID on the
drive, migrating or expanding the capacity of
the strip size, expanding the capacity of the
logical drive, or erasing the drive.
A drive is a member of one or more logical
drives and a drive failure is predicted.
The drive does not form in the array
configuration, and a failure in the drive is
predicted.
Drive has failed.
The RAID controller does not allow the drive
to form in the array configuration.