NetApp StorageGRID Webscale SG5700 Series Hardware Installation And Maintenance Manual page 37
Hide thumbs
Also See for StorageGRID Webscale SG5700 Series:
- Hardware installation and maintenance manual (89 pages) ,
- Install (15 pages) ,
- Manual (362 pages)
Table of Contents
Advertisement
Configuring the hardware | 37
b. Make sure Manually specify static configuration is selected.
c. Change the IP address of port 1 to a routable management IP address, subnet mask, and
gateway.
8. If you selected Enable IPv6:
a. Click Next.
b. Make sure Manually specify static configuration is selected.
c. Enter an IP address, routable IP address, and Controller A router IP address.
Advertisement
Table of Contents
Troubleshooting
