10/25-Gbe Port Connections For The E5700Sg Controller - NetApp StorageGRID Webscale SG5700 Series Hardware Installation And Maintenance Manual

Port
4 10/25-GbE ports 1-4
on the E5700SG
controller
Related concepts

10/25-GbE port connections for the E5700SG controller

Related tasks
Gathering installation information
Cabling the appliance
Related information
VMware installation
Red Hat Enterprise Linux or CentOS installation
Ubuntu or Debian installation
10/25-GbE port connections for the E5700SG controller
When connecting the 10/25-GbE ports on the E5700SG controller to the StorageGRID Webscale
Grid Network and Client Network, you can use fixed port bond mode or aggregate port bond mode.
The port bond modes help protect your data by providing redundant paths between StorageGRID
Webscale networks and the appliance.
Related tasks
Configuring network links
Fixed port bond mode
Fixed port bond mode is the default configuration for the 10/25-GbE ports.
Callout Which ports are bonded
C Ports 1 and 3 are bonded together for the Client Network, if this network is used.
Type of port
10-GbE or 25-GbE
The SFP+
Note:
transceivers
included with the
appliance support
10-GbE link speeds.
If you want to use
25-GbE link speeds
for the four network
ports, you must
provide SFP28
transceivers.
on page 19
on page 26
on page 43
Preparing for installation | 17
Function
Connect to the Grid Network and the
Client Network for StorageGRID
Webscale. See "10/25-GbE port
connections for the E5700SG
controller."
on page 17