Mira event Installation, Operation, Maintenance Manual page 42

Orange Wires
PCB
Short
Black
Wire
Green
Earth Wire
Pump and
Motor Assembly
Black Wire
(supplied loose)
Pump and
Motor
Earth
Assembly
PCB
Wire
L N
Long Black
9.5.
Wire
9.6.
9.7.
On/Off
Microswitch
9.8.
Ensure wires are
neatly tucked into
V-Channels
9.9.
9.10. Position and secure the PCB
9.11. Ensure all wires are neatly
Microswitches
42
Disconnect and remove the
old PCB.
Fit the shorter black wire of
the new PCB to the free rear
motor terminal.
Fit the longer black wire of the
new PCB to one of the on/off
micro-switch terminals.
Fit one end of the black wire
that is supplied loose to the
free front motor terminal and
the other end to the free on/off
micro-switch terminal.
There is no change to the
connection of the orange wires
to the boost micro-switch.
and reconnect the Earth wire.
tucked into the case V
channels around the motor &
mixer assembly.