Table of Contents
Advertisement
Section
10
1. General
Each Mira Event is precision engineered to provide satisfactory performance
provided it is installed and operated in accordance with our recommendations
contained in section entitled "Installation Notes".
2. Cleaning
Many household cleaners contain abrasives and chemical substances, and
should not be used for cleaning plated or plastic fittings. These finishes should
be cleaned with a mild washing up detergent or soap solution, and then wiped
dry using a soft cloth.
3. Inlet Filters, Cleaning or 'O' Seals Renewal
The following procedure can be applied for cleaning or renewing the inlet filters
or inlet filter 'O' seals.
Warning! Isolate the electrical and water supply to the appliance before
proceeding.
Turn flow control on and off to relieve water pressure.
Cover
retaining
Temperature
Flow knob
Indicator
Inlet filter cap
Maintenance
3.1.
Use the push-fit release tool
to lever off the flow knob,
indicator trim and
temperature knob. Unscrew
the cover retaining screw
and remove the cover by
pulling the bottom of the
cover in an outward and
upward direction.
3.2.
Remove the inlet filter cap
retaining screw and filter
cap.
31
Hide quick links:
Advertisement
Table of Contents
