Table of Contents
Advertisement
11. Smaller Micro-switch
Cover
retaining
screw
Smaller
micro-switch
Drip shield
Temperature
knob
Flow knob
Indicator trim
11.1. Remove drip shield and
carefully lever off the smaller
micro-switch.
11.2. Remove electrical supply
wiring to micro-switch.
11.3. Reconnect the electrical
supply wiring to the new
micro-switch.
11.4. Fit the new miocro-switch
and refit the drip shield.
11.5
Refit the cover by locating
the cover onto the tongue on
the top of the case. Push the
bottom of the cover against
the case, tighten the cover
retaining screw, refit the
temperature knob, indicator
trim and flow knob.
11.6. The adjustable maximum
temperature will also require
to be reset, refer to
"Adjustable Maximum
Temperature Setting".
Restore the electrical
supplies.
45
Hide quick links:
Advertisement
Table of Contents
