1.7.
Run the electrical supply
cable in surface mounted
miniature trunking (not
supplied).
Allow sufficient cable to
connect to the appliance
terminal block (approximately
275mm).
Strip back approximately
30mm of outer cable
insulation.
1.8.
Hot and cold inlet supply
connections as marked are:-
Hot – Left
Right
Note! Reversed supply
connections cannot be
catered for with this
appliance.
Run the hot and cold water
supply pipes at 28mm
centres, ensuring that the
pipe ends project into the
appliance by 30mm to allow
connection into the inlet
manifold.
Cold –
18
30
28
30
All dimensions in millimetres
Miniature
trunking
275