Introduction - Mira event Installation, Operation, Maintenance Manual

Section
1
Thank you for purchasing a quality Mira product. To enjoy the full potential of
your new shower, please take time to read this guide thoroughly, having done
so, keep it handy for future reference.
The Mira Event is a dual speed all-in-one power shower with an integral mains
voltage pump unit, with separate controls for flow and temperature. The Event
features outlet flow control and a 15mm dual entry push-fit inlet manifold to
enable the appliance to support various inlet supply configurations. The manifold
incorporates inlet filters and check valves.
Designed to be surface mounted the Event is supplied complete with an
adjustable spray handset with three different spray actions (start, champagne,
massage) and an economy setting, flexible hose, adjustable clamp bracket
assembly, slide bar and supports, soap dish and hose retaining ring. The Event
is available with the shower fittings in white/chrome finish or all white finish.
The Event is not suitable for installation in institutional/commercial applications
or for use with mains water pressure applications, e.g. Instantaneous electric
heaters, instantaneous gas water heaters, unvented mains pressure systems,
pumped shower systems and some combination type storage systems.
If you experience any difficulty with the installation or operation of your new Mira
Event, then please refer to the back cover of this guide for Kohler Mira contact
telephone and fax numbers.

Introduction

4