Introduction - Mira GO 8.5 Installation, Operation, Maintenance Manual

Section
1
Thank you for purchasing a quality Mira product. To enjoy the full potential of your new
product, please take time to read this guide thoroughly, having done so, keep it handy
for future reference.
A range of electric showers having separate controls for power selection and
temperature/flow adjustment. A unique flow regulator stabilises temperature changes
caused by water pressure fluctuations. These can result from taps being turned on or
off or toilets being flushed.
Mira Go 8.5 - A 8.5 kW 240 V AC heater with a Mira React adjustable spray handset
with three different spray actions (Start, Soothe and Force). Supplied complete with
flexible hose, adjustable clamp bracket assembly, soap dish, slide bar and supports
and hose retaining ring. Available in all white finish.
If you experience any difficulty with the installation or operation of your new shower
control, then please refer to the Maintenance and Fault Diagnosis section, before
contacting Mira Showers. Our telephone and fax numbers can be found on the back
cover of this guide.

Introduction

3