AMI Hydrogen QED
Program List and Explanations
5 Installation
5.1 Sensors
5.1.1
5.1.1.1
5.1.1.2
5.1.1.3
5.1.2
5.1.2.1
5.1.3
5.1.3.1
5.1.3.2
60
Miscellaneous
Flow: If a flow cell without flow measurement (e.g. B-Flow) is used,
choose none. With flow measurement select Q-Flow
Offset: Manual, small correction of the offset. Range 0–3 ppb.
Maintenance Int.: Select the interval of the automatic sensor
regeneration:
Off
3 hours
6 hours
12 hours
Quality Assurance
Level: Choose the quality level according to your requirements:
Level 0: Off
Quality assurance procedure switched off. Any additional QA
menus are hidden.
Level 1: Trend
Level 2: Standard
Level 3: Crucial
Level 4: User
Edit user-specific limits in menu 5.1.2.2
Sensor parameters
Saturation current: Enter the saturation current printed on the
sensor label.
Range: 2.000–4.500 µA
Air pressure: Enter the air pressure printed on the sensor label.
Range: 900–1100 hPa
A-96.250.791 / 040219