Swann AMI Hydrogen QED Operator's Manual page 58

AMI Hydrogen QED
Program List and Explanations
2.2.1.5
2.2.2
2.2.2.1
2.2.3
2.3 Sample
2.3.301
2.4 I/O State
2.4.1
2.5 Interface
2.5.1
56
Cal. History
Review the diagnostic values of the last calibration of the hydrogen
sensor. Max. 64 data records are memorized.
Number
Date, Time
Sat. Current
Air pressure
Miscellaneous:
Case Temp: Shows the actual temperature in °C inside the
transmitter.
Air pressure: Shows the actual air pressure in hPa
QA History
Review QA values (Number, Date, Time, Deviation Hydrogen, De-
viation Temperature, Status of QA check) of the last quality assur-
ance procedures.
Sample ID: Shows the assigned sample identification. This
identification is defined by the user to identify the location of the
sample.
Temperature: Shows temperature in °C.
(Nt5K): Shows raw value of the temperature in Ω.
Sample Flow: Shows the sample flow in l/h
(Raw value) Shows the sample flow in Hz
Shows actual status of all in- and outputs.
Alarm Relay:
Relay 1 and 2:
Input:
Signal Output 1 and 2:
Signal Output 3:
Only available if optional interface is installed.
Shows the programmed communication settings.
Active or inactive
Active or inactive
Open or closed
Actual current in mA
Actual current in mA (if option is installed)
A-96.250.791 / 040219