Swann AMI Hydrogen QED Operator's Manual page 12

AMI Hydrogen QED
Product Description
Fluidics
10
Swansensor Hydrogen combined with QV-flow PMMA OTG flow
cell [A].
The sample flows via sample inlet [H] through the flow regulating
valve [E], where the flow rate can be adjusted. Then the sample
flows through the Faraday electrode [D] into the measuring cell
were the hydrogen concentration of the sample is measured.
The sample leaves the measuring cell via flow sensor [B] through
the sample outlet [F] and flows into the drain funnel [G].
A Flow cell
B Flow sensor
C Swansensor hydrogen
D Faraday electrode
A
B
C
D
E
F
G
H
E Flow regulating valve
F Sample outlet
G Drain funnel
H Sample inlet
A-96.250.791 / 040219