Enable / Disable Demo Mode - Comtech EF Data CDM-570L Installation And Operation Manual

CDM-570L Satellite Modem with IP Module

Enable / Disable Demo Mode

Control FAST Demo Mode as follows:
CHANGING THE STATE OF DEMO MODE WILL CAUSE THE MODEM FIRMWARE TO
REBOOT. ALSO, IF DEMO MODE IS ENABLED AND THE TIMER EXPIRES THE
MODEM FIRMWARE WILL REBOOT.
IMPORTANT
FAST Code Rejected!
a. Press CLEAR to return to the menu.
b. Select Cnfg , then press ENTER. Use the
cursor to Demo Mode .
FAST Configuration:
Edit Code
c. Press ENTER .
FAST Demo Mode: Off
604800 seconds remain
Use the ◄ ► arrow keys to move the cursor to select Off or On. When On,
the second line will display the under of seconds remaining available for the
free Demo Mode. When enabled, Demo Mode allows access to ALL CDM-
570L FAST options for 604800 seconds (7 full days). Demo Mode may be
turned on and off an unlimited number of time until the 604800 seconds have
expired. The seconds count is only decrement when the mode is On. When
the Demo period expires the following menu is display displayed:
FAST Demo Mode: Off
Demo Period Expired
(ENTER or CLEAR)
Demo Mode
On
On
287
MN/CDM570L.IOM
◄ ► arrow keys to move the
Revision 1