Udp Group - Comtech EF Data CDM-570L Installation And Operation Manual

CDM-570L Satellite Modem with IP Module
OID
TcpRtoAlgorithm
TcpRtoMin
TcpRtoMax
TcpMaxConn
TcpActiveOpens
TcpPassiveOpens
TcpAttemptFails
TcpEstabResets
TcpCurrEstab
TcpInSegs
TcpOutSegs
TcpRetransSegs
18.5.4.1 The TCP Connection Table
The tcpConnTable is a table containing TCP connection-specific information. Each row
contains information about a particular current TCP connection. A row is transient, in
that it ceases to exist when the connection makes the transition to the CLOSED state.
This table is implemented per RFC1213.
18.5.5
This group contains control parameters and statistics for the UDP protocol. This group
contains a UDP table describing the UDP ports in use. This group is implemented per
RFC1213.
18.5.5.1 The UDP Listener Table
The UDP listener table contains information about this entity's UDP end-points on which
a local application is currently accepting datagrams. A row contains information about a
particular current UDP listener. This group is implemented per RFC1213.
Algorithm used to determine the timeout value used for
retransmitting unacknowledged octets. The CDM-570L uses Van
Jacobson's algorithm.
Minimum value permitted by a TCP implementation for the
retransmission timeout. The CDM-570L uses a minimum timeout
of 1000 milliseconds.
Maximum value permitted by a TCP implementation for the
retransmission timeout. The CDM-570L uses a maximum timeout
of 64000 milliseconds.
Limit on the total number of TCP connections the entity can
support. In the CDM-570L, the maximum number of connections
is dynamic so a value of –1 is returned.
Per RFC1213
Per RFC1213
Per RFC1213
Per RFC1213
Per RFC1213
Per RFC1213
Per RFC1213
Per RFC1213

UDP Group

Description
266
Revision 1
MN/CDM570L.IOM