ABB ProcessMaster FEP611 Operating Instructions Manual page 70

Error no. / Error text
Range
M038.010 / Sensor memory defective.
Electronics Mem. or connect. defective.
Replace memory.
M037.015 / NV chips defect on
Electronics Motherboard.
Defective MB. Replace MB.
Call Service.
M032.023 / Curr.Out 31 / 32 not
Config. calibrated.
Call Service.
M028.008 / Display value is < 1600 h at
Config. Qmax.
Change mass Unit or vol.
Unit for Totalizer.
M026.005 / Maintenance interval is
Config. reached.
Perform maintenance.
M024.009 / Device not calibrated.
Config. Call Service.
Change from one to two columns
70 OI/FEP610/FEH610-EN Rev. B | ProcessMaster FEP610, HygienicMaster FEH610
Current output Digital output
Current value - no No response.
change.
High Alarm or Low Current value - no
Alarm, depending change.
on parameter
"Curr.Out at
Alarm".
Pulse output LCD display
Current value - no Current value - no
change. change.
Current value - no Current value - no
change. change.
Error maskable?
Menu "...Group
Masking".
Menu "...Group
Masking".