ABB ProcessMaster FEP611 Operating Instructions Manual page 35

Menu
Easy Setup
Exit Select
5. Use / to select "Easy Setup".
6. Confirm the selection with
Easy Setup
Language
Deutsch
Next
7. Use to call up the edit mode.
8. Use / to select the desired language.
9. Confirm the selection with
Easy Setup
Unit Volumeflow Qv
Next
10. Use to call up the edit mode.
11. Use / to select the desired unit for the volume
flow.
12. Confirm the selection with
.
Edit
.
l/s
Edit
.
Easy Setup
Qv Max 1
Next
13. Use to call up the edit mode.
14. Use / to select the desired upper range value.
15. Confirm the selection with
The device is factory calibrated to the flow range end value
Q DN, unless other customer information is available. The
max
ideal flow range end values are approximately 2 ... 3 m/s
(0.2 ... 0.3 x Q DN).
max
The possible flow range end values are shown in the table in
chapter "Measuring range table" on page 37.
Easy Setup
Unit Vol. Totalizer
Next
16. Use to call up the edit mode.
17. Use / to select the desired unit for the volume
totalizer.
18. Confirm the selection with
Easy Setup
Pulses per Unit
10.000/m³
Next
19. Use to call up the edit mode.
20. Use / to set the desired value.
21. Confirm the selection with
ProcessMaster FEP610, HygienicMaster FEH610 | OI/FEP610/FEH610-EN Rev. B 35
25.000 l/s
Edit
.
l/s
Edit
.
Edit
.