Keypad Operation; Clear Error - Motion Control Engineering Motion 4000 Manual

Installation
Figure 2.4 Torqmax Display
ON when drive
is transmitting

Keypad Operation

Please refer to "KEB Keypad Overview" on page

Clear Error

If an error is displayed (E. UP, etc.), the drive will shut down. To clear the error:
• Press ENTER
The E.ENCC error is an exception and must be cleared using parameter LF.26.
2-18 Manual # 42-02-2P24
Parameter group
(LF, LP, US, etc.)
Parameter number
2-19.
Blinking "point" means
that segment (group or
number) is ready to
accept an entry
ON = Normal
BLINKING = Error