Fc5100A Stand Manual; Contents - GRAPHTEC FC5100A-75 User Manual

FC5100A Stand Manual

Contents

The FC5100A Stand is used to make the unit more portable, free-up counter
space and make storing your plotter easier. The Stand is optional for the
FC5100A-75. It is a standard accessory for the FC5100A-100, FC5100A-130, and
FC5100A-150 cutters.
WARNING: Use two people to pick up the plotter.
CAUTION: Do not install the plotter onto the stand with the conveyor rollers or media
installed. The unit becomes unstable when heavy loads are added. In
extreme cases, the unit may tip over.
CAUTION: Improper assembly of the stand may cause the unit to become unstable when
heavy loads are added. In extreme cases, the unit may tip over.
CAUTION: The longer length leg platform is installed towards the back of the unit.
CAUTION: To ensure the stability and strength of the stand, all screws should be periodi-
cally inspected and re-tightened as needed.
NOTE: Always keep the wheels in a locked position when operating your plotter.
1 Base assembly (Qty. 2)
2 Stand side (Qty. 2)
3 Middle Bar (Qty. 1)
(For FC5100A-100, FC5100A-130, and FC5100A-150 models, the middle bar
is supplied in the cutting plotter shipping box.)
4 Socket head cap screw A (M5) (Qty. 8)
5 Socket head cap screw B (M6) (Qty. 8)
6 Cap plug (Qty. 4)
7 L wrench hex key tool A (M5) (Qty. 1)
8 L wrench hex key tool B (M6) (Qty. 1)
1
4
2
5 6 7
O p t io n s: F C5 100 A S t an d M a n ua l
187
3
8