Table of Contents
Advertisement
48
Initializing Routine
ROLL-1
Pre pa rin g to C ut: In itia li zin g Ro u t in e
Press the F4 key to select CONTINUE
No sensing operations are performed. Set the various functions of the plotter as
desired.
NOTE:
Make sure to set the correct cutting conditions to suit the cutter blade and
media being used. For details see Setting Conditions.
1
During initialization, the pen carriage moves right until it detects the mechani-
cal home position.
2
The pen carriage then moves left until it detects the left-hand side of the media
edge.
3
It then returns to the right edge of the media.
4
The media is fed backwards until the media's leading edge is detected.
ROLL-1>
*
ROLL-2>
*
SHEET>
*
CONTINUE>
*
Advertisement
Table of Contents
Troubleshooting
