GRAPHTEC FC5100A-75 User Manual page 110

110
• Press the F3 or F4 key to select the axis for setting distance.
to change polarity for distance setting. Press the LEFT or RIGHT
ARROW key to move the blinking cursor to select a digit, then press the
UP or DOWN ARROW key to change the number.
Pattern 1
Plotter's
Origin Point
Mark 3
• Press the ENTER key to register your setting.
If you wish to set another parameter, press the key corresponding to
that setting.
Ad v an ce d Fu n ct i on s an d S e t ti ng s : A UT O R E G . M A RK - Au t o Re gi st r a ti on M ar k S e n so r
AXIS ORIGIN OFFSET
In the X-Axis, enter the distance between registration mark 1 and the axis origin
point on the X-axis. In the Y-Axis, enter the distance between registration mark
1 and the axis origin point on the Y-axis. The distance can be set from -
200mm to 200mm.
Press the F2 key to toggle polarity, the "–" mark appears on the distance setting
when you've selected negative.
Mark 2
Media feed
direction
Mark 1 X
Axis Origin
Y
Point
+/- >.
X = ...000.0 mm**
Y = ...000.0 mm**
Pattern 2
Plotter's
Origin Point
Mark 3
The following menu appears.
MARK SIZE>*
SENSOR OFFSET ADJ>*
AXIS ORIGIN OFFSET>*
PAPER-WEIGHT>*
Press the F2 key
Mark 2
X
Mark 1
Axis Origin
Y
Point