Initial Menu; Setting The Multilanguage Display - GRAPHTEC FC5100A-75 User Manual

Initial Menu

Setting the Multilanguage Display

When the paper set lever is lowered, the INITIAL menu appears on the LCD.
Menu Function Selection
INITIAL
MENU
F4 KEY
Your plotter's display can be set to one of 12 different languages. To select the
language:
Method 1:
• Press the MENU key to select MENU MODE.
• Press the NEXT key until you get to BACKGROUND SETTING menu.
• Press the F2 key to select BACKGROUND SETTING menu; the LANGUAGE
SELECTION menu appears.
• Press the UP and DOWN ARROW keys to scroll through the languages (Danish,
Dutch, English, French, German, Hungarian, Italian, Japanese, Norwegian, Por-
tuguese, Spanish and Swedish).
• Press the ENTER key to select the desired language, the next menu appears
with the newly selected language.
• Press the MENU key to cancel MENU MODE.
Method 2:
• Turn the power on while pressing the DOWN ARROW key; the Menu selection
display appears.
• Press the UP and DOWN ARROW keys to scroll through the languages (Danish,
Dutch, English, French, German, Hungarian, Italian, Japanese, Norwegian, Por-
tuguese, Spanish and Swedish).
• Press the ENTER key to select the desired language and then turn the power off
and then on again.
AUTO REG. MARK
AUTO PRE FEED
INITIAL FEED SPEED
INTERFACE
Pre p ari ng t o C u t: In i ti al Me nu
37
Sub Menus
STEP SIZE
RS-232C
COMMAND