154
• Press the F4 key to select OPTION 2.
• Press the F4 key to select TEST.
• Press the F3 key to select SELF TEST.
The following message appears:
Confirm that the pen is mounted on the carriage .
• Press the F3 key to start plotting or press the F4 key to cancel plotting.
You may have to turn off the plotter to cancel SELF TEST if the plotter is in the
SELF TEST mode.
The following message appears:
When you have finished printing the SELF TEST pattern, turn off the plotter to
cancel SELF TEST mode.
NOTE: The self-test pattern is repeadtedy printed until the plotter is turned off. To stop
T est M o de s an d T r o ub l esh o o ti ng : S E L F T E S T - Ru n n in g t he S e lf T es t
BACKGROUND
MOUNT THE PEN!
printing, even if a pattern is not completely printed, simply turn off the plotter
SETTINGS>*
OPTION
1>*
OPTION
2>*
INITIAL DOWN
FORCE>*
DISTANCE
ADJUST>*
TEST>*
CONDITON
LIST>*
SELF
TEST>*
DATA
DUMP>*
........DONE>.
CANCEL SELF
TEST>.
SELF TEST