General Settings - ProMinent DULCOMETER DMT Series Operating Instructions Manual

DMT settings

7.2.4 General settings

T
general settings
DMTaW090T10E0020
7.2.4.1 Changing device type
The first menu option, "device type", is used to switch between the measured
variables pH value, redox voltage or temperature:
The corresponding identity code position changes depending on your choice:
pH= "P", redox = "R", temperature = "T".
If you confirm the change of measured variable using the enter key
the output current changes immediately.
The settings for each measured variable are unaffected by switching from one
to another, i.e. you do not need to re-set them when re-selecting a measured
variable.
7.2.4.2 Changing general settings
The second menu option; "general settings", is used to adapt the DMT to
your specific process requirements.
Scroll through individual identity code positions using the "Change" key
until you reach the one you require. Non-adjustable features are automatically
bypassed.
The following tables show the settings options for each measured variable
(the sequence from left to right corresponds to the identity code positions).
Measured variable temperature
Language Probe type
D = German standard
E = English 0 = PT 100 or
F = French
P = Polish
I = Italian
S = Spanish
Page 36
2.1.06
Under "type", select pH, ORP (redox) or Temperature.
Temperature
input
0 = sensor
PT 1000 (100)
PT 1000
device type
!! correct probe ??
type = temp.
DMTaW090T10E0020
general settings
change
access code = 5000
free access
Output current
0 = measured variable;
at fault 23 mA
at calibration 23 mA
1 = adjustable output
2 = measured variable
or adjustable;
at fault 23 mA
at calibration 23 mA
4 = 4 mA constant current
general settings
language
DMTaW090T10E0020
E = english
,
Additional
settings
0 = standard
ProMinent ®