To Set Brightness Of Lcd Back Light; To Enable/Disable Lcd Backlight Fade Control; To Change Font Size; To Set A Language - NEC Univerge SV9500 User Manual

This terminal has a screen saver
enabled by default. If you disabled the
screen saver and the same screen is
displayed for a long time, an
afterimage may appear on the display,
but this is not a malfunction. The
afterimage is gradually eliminated by
changing the screen display. However,
if the same screen is displayed for too
long, the afterimage will not disappear,
so keep the screen saver enabled.
TO SET BRIGHTNESS OF LCD
BACK LIGHT
Following explains how to set the brightness of
the LCD back light.
1.
Display the Menu screen, and select "Settings"
2.
Select " 1 User Settings".
3.
Select " 3 Display"
4.
Select " 4 Back Light".
5.
Select a desired brightness.
The lighting time of back light is set by
system data setting at initial installation
(initial setting is 10 seconds). For
details, please contact the system
administrator
TO ENABLE/DISABLE LCD
BACKLIGHT FADE CONTROL
Following explains how to set Backlight Fade
Control. When you set Backlight Fade Control as
"Enable", LCD is smoothly turned On/Off.
1.
Display the Menu screen, and select "Settings"
2.
Select " 1 User Settings".
3.
Select " 3 Display"
4.
Select " 6 Advanced".
(When GUI mode is classic, menu number is 7.)
5.
Select " 2 Backlight Fade Control".
(When GUI mode is classic, menu number is 5.)
6.
Select whether to turn On/Off the LCD smoothly.

TO CHANGE FONT SIZE

Following explains how to change the font size
displayed on the LCD.
This function is available when GUI
mode is classic.
1.
Display the Menu screen, and select "Settings"
2.
Select " 1 User Settings".
3.
Select " 3 Display"
4.
Select " 5 Font Size".
5.
Select Font Size.

TO SET A LANGUAGE

Following explains how to set a language displayed
on the LCD. Here you can select the language for
calendar (month / day) on home screen and menu.
1.
Display the Menu screen, and select "Settings"
2.
Select " 1 User Settings".
3.
Select " 3 Display"
4.
Select " 5 Language" .
(when GUI mode is Classic, select 6 )
5.
Select language.
23
TERMINAL SETUP