Huawei SUN2000-60KTL-M0 User Manual page 93

SUN2000-60KTL-M0
User Manual (Europe Edition)
No. Paramete Description
r
power generate reactive
compensati power to support the
on power power grid. This
factor parameter is used to
set the reactive power
generated by the
SUN2000.
When the power grid
5 HVRT
voltage is abnormally
high for a short time,
the SUN2000 cannot
disconnect from the
power grid
immediately and has
to work for some time.
This is called high
voltage ride-through
(HVRT).
Active Specifies whether to
6
islanding enable the active
islanding protection
function.
7 Voltage The standards of
rise certain countries and
suppressio regions require that
n the SUN2000 should
prevent the grid
voltage from rising by
delivering reactive
power and decreasing
active power when the
output voltage exceeds
a certain value.
8 Voltage The standards of
rise certain countries and
suppressio regions require that
n reactive the SUN2000 must
adjustment generate a certain
point amount of reactive
power when the output
voltage exceeds a
certain value.
9 Voltage The standards of
rise certain countries and
suppressio regions require that
Issue 02 (2018-10-15)
Unit Default
Value
N/A Disable
N/A Enable
N/A Disable
% 110
% 112.5
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Value Range Remarks
reactive power
compensation
power factor to 2,
the reactive current
generated by the
SUN2000 is 20%
of the rated current
when the AC
voltage drops by
10% during
LVRT.

Disable N/A
 Enable

Disable N/A
 Enable
 Disable N/A

Enable

[100, 115] This parameter
is displayed
when Voltage
rise
suppression is
set to Enable.
 The value of
Voltage rise
suppression
active derating
[100, 115]
point must be
greater than
87