Huawei SUN2000-60KTL-M0 User Manual page 68

SUN2000-60KTL-M0
User Manual (Europe Edition)
Procedure
Step 1 Turn on the AC switch between the SUN2000 and the power grid.
If you perform
You can start the SUN2000 only after the fault is automatically rectified.
Step 2 Turn on the DC switch at the bottom of the SUN2000.
Step 3 Connect the SUN2000 to the mobile phone that runs SUN2000 app through a Bluetooth
module or USB data cable.


Figure 6-1 Bluetooth module connection
(A) SUN2000
Figure 6-2 Data cable connection
(A) SUN2000
Issue 02 (2018-10-15)
Step 2 before
Mobile phone operating system: Android 4.0 or later, iOS 7.0 or later. When the iOS is
used, the app supports only Bluetooth connection.
The screenshots in this document correspond to SUN2000 app 2.2.00.020.
Purchase the Bluetooth module bundled with the SUN2000. A Bluetooth module purchased from any
other source may not support communication between the SUN2000 and the app.
Copyright © Huawei Technologies Co., Ltd.
Step 1, the SUN2000 reports a fault about abnormal shutdown.
(B) Bluetooth module
(B) USB data cable
6 Commissioning
(C) Mobile phone
(C) Mobile phone
62