Huawei SUN2000-60KTL-M0 User Manual page 107

SUN2000-60KTL-M0
User Manual (Europe Edition)
Output
Item
Rated active power
Maximum apparent power
Maximum active power (cosφ = 1)
Rated output voltage
Rated output current
Adapted grid frequency
Maximum output current
Power factor
Maximum total harmonic
distortion (rated power)
Note a: The rated output voltage is determined by Grid code, which can be set on the
SUN2000 app, SmartLogger, or NetEco.
Note b: Choose whether to connect the neutral wire to the SUN2000 based on the
application scenario. When it is used in the scenarios without neutral wires, set Output
mode to Three-phase, three-wire. When it is used in the scenarios with neutral wires, set
Output mode to Three-phase, four-wire.
Protection
Item
Input DC switch
Anti-islanding protection
Output overcurrent protection
Input reverse polarity protection
PV string fault detection
DC surge protection
AC surge protection
Insulation resistance detection
Residual current monitoring unit
(RCMU)
Overvoltage category
Issue 02 (2018-10-15)
a
Copyright © Huawei Technologies Co., Ltd.
SUN2000-60KTL-M0
60 kW
66 kVA
66 kW
220 V/380 V, 230 V/400 V, 277 V/480 V,
b
3W+(N) +PE
91.2 A (380 V), 86.7 A (400 V), 72.2 A (480 V)
50 Hz/60 Hz
100 A (380 V), 95.3 A (400 V), 79.4 A (480 V)
0.8 leading... 0.8 lagging
< 3%
SUN2000-60KTL-M0
Supported
Supported
Supported
Supported
Supported
Type II
Type II
Supported
Supported
PV II/AC III
10 Technical Specifications
101