Huawei SUN2000-60KTL-M0 User Manual page 108

SUN2000-60KTL-M0
User Manual (Europe Edition)
Item
Built-in PID repair
Note a: When the SUN2000 is disconnected from the grid and stops working, the built-in
PID can achieve the PV– positive offset of the PV module. (PV– positive offset refers to
raising the voltage between PV– and the ground to above 0 V through voltage
compensation.) When designing a power plant, confirm with the PV module manufacturer
that the anti-PID voltage compensation direction of the PV module is the same as the
direction of the PV– positive offset. Otherwise, PV modules may be damaged.
For the SUN2000 that supports built-in PID repair, when Built-in PID running mode is set
to Repair, there is repair voltage between PV modules and the ground at night. If you need to
maintain PV modules at night, power off the SUN2000 to avoid electric shocks.
Display and Communication
Item
Display
Communication networking mode
Common Parameters
Item
Dimensions (W x H x D)
Net weight
Operating temperature
Cooling mode
Highest operating altitude
Humidity
Input terminal
Output terminal
Ingress Protection Rating
Topology
Issue 02 (2018-10-15)
a
Copyright © Huawei Technologies Co., Ltd.
SUN2000-60KTL-M0
Optional
SUN2000-60KTL-M0
LED, Bluetooth module+app, USB data cable+app
PLC/RS485
SUN2000-60KTL-M0
1075 mm x 555 mm x 300 mm
74 kg± 1 kg
–25° C to +60° C
Natural convection
4000 m
0%–100% RH
Amphenol Helios H4
Cable gland+terminal clamp
IP65
Transformerless
10 Technical Specifications
102