SUN2000-60KTL-M0
User Manual (Europe Edition)
Ensure that AC output power cable is secured and in close contact with terminal clamps.
Failing to do so may cause the SUN2000 malfunction or damage to its terminal block by
issues such as overheating. Any SUN2000 damaged due to weak termination will result in
revocation of product warranty.
When connecting a PE cable, secure the screws using a socket wrench with an extension
wrench longer than 200 mm.
If the AC output power cables are subject to a pulling force because the inverter is not
installed stably, ensure that the last cable that bears the stress is the PE cable.
Figure 5-12 Three-core cable (excluding the ground cable and neutral wire)
Issue 02 (2018-10-15)
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
40