Huawei SUN2000-60KTL-M0 User Manual page 84

SUN2000-60KTL-M0
User Manual (Europe Edition)
No. Parameter Description
8 Crystalline The PID effect may
silicon PV result in the power
compensati attenuation of PV
on mode modules, which is
mainly caused by the
DC voltage between
PV modules and the
ground. Enabling this
setting lowers the DC
voltage between PV
modules and the
ground by reducing
the impedance on the
input side to the
ground.
9 Built-in Specifies the
PID operation mode of the
running SUN2000 built-in
mode PID.
10 PID Specifies whether to
nighttime enable the PID
off-grid nighttime off-grid
repair repair.
11 PID Specifies whether to
daytime enable the PID
off-grid daytime off-grid
repair repair.
12 String Specifies the
connection connection mode of
mode PV strings.

Issue 02 (2018-10-15)
Unit
N/A
N/A
N/A
N/A
N/A
When the PV
strings connect to
the inverter
separately (fully
separate
connection), there
is no need to set
this parameter.
The inverter can
automatically
detect the
Copyright © Huawei Technologies Co., Ltd.
Default Value Range
Value
Disable  Disable
output output
 PV– positive
offset

PV+
negative
offset

Repair Disable
 Repair
Enable  Disable
 Enable
Disable  Disable

Enable

Automatic Automatic
detection detection
 All PV
strings
separated

All PV
strings
connected
7 Man-Machine Interactions
Remarks
drops
drastically
due to
shading.
This parameter is
displayed only if PV
module type is set
to Crystalline
silicon.
This parameter is
displayed only for
the models that
support Built-in
PID repair.
This parameter is
displayed only if
Built-in PID
running mode is set
to Repair.
This parameter is
displayed only if
Built-in PID
running mode is set
to Repair.
N/A
78