SUN2000-60KTL-M0
User Manual (Europe Edition)
1. Select appropriate rubber fittings based on the outer diameter of the AC power cable to
ensure proper sealing.
2. To avoid damaging the rubber fitting, do not route a cable with a crimped OT terminal
directly through the rubber fitting.
3. Adjusting a cable when the thread-lock sealing nut is tightened will shift the rubber fitting,
which will affect the Ingress Protection Rating of the device.
Figure 5-7 Routing a cable
Step 3 Remove an appropriate length of the jacket and insulation layer from the AC output power
cable using a wire stripper.
Ensure that the jacket is in the maintenance compartment.
Figure 5-8 Three-core cable (excluding the ground cable and neutral wire)
(A) Core wire
Issue 02 (2018-10-15)
(B) Insulation layer
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(C) Jacket
38