Expanding And Assigning Parameters To The Device; Installing And Removing The Memory Module; Opening The Device - Siemens SIMATIC IPC427E Operating Instructions Manual

Expanding and assigning parameters to the device

6.1

Installing and removing the memory module

6.1.1

Opening the device

Note
Work on the open device may only be carried out by authorized and qualified personnel.
Within the warranty period, you may only expand the hardware with memory and expansion
cards.
NOTICE
The device contains electronic components that may be destroyed by ESD
You therefore need to take precautionary measures before you open the device. Please refer
to the ESD Directives on handling electrostatic-sensitive components in ESD guideline
(Page 79).
Requirement
• The device is disconnected from the power supply.
• 1 T10 screwdriver
Procedure
Opening the device
1. Remove the marked screws.
54
Operating Instructions, 02/2021, A5E37454814-AE
6
SIMATIC IPC427E