Important Warnings For Safety - CD Automation Revo C 3PH User Manual

2 Important warnings for safety

This chapter contains important information for the safety. The not observance of these instructions may result in
serious personal injury or death and can cause serious damages to the Thyristor unit and to the components system
included.
The installation should be performed by qualified persons.
In the manual are used symbols to give more evidence at the notes of safety and operativity for the
attention for the user:
This icon is present in all the operational procedures where the Improper operation
may result in serious personal injury or death by Electrical Shock Hazard
Symbol (a lightning bolt in a triangle) precedes an electric shock hazard CAUTION
or WARNING safety statement.
Warning or Hazard that needs further explanation than the label on unit can
provide. Consult User's Guide for further information.
Unit is compliant with European Union directives.
See Declaration of Conformity for further de-tails on Directives and Standards used
for Compliance.
If avalilable, unit is a Listed device per Underwriters Laboratories. It has been
investigated to ANSI/UL® 508 standards for Industrial Control Switches and
equivalent to CSA C22.2 #14.
www.ul. Com
ESD Sensitive product, use proper grounding and handling techniques when
installing or servicingproduct.
Do not throw in trash, use proper recycling techniques or consult manufacturer for
proper disposal.
A "NOTE" marks a short message to alert you to an important detail.
A "CAUTION" safety alert appears with information that is important for protecting your equipment and
performance.Be especially careful to read and follow all cautions that apply to your application.
A "WARNING" safety alert appears with information that is important for protecting you, others and
equipment from damage. Pay very close attention to all warnings that apply to your application.
2.1 Safety notes
WARNING! To avoid damage to property and equipment, injury and loss of life, adhere to
applicable electricalcodes and standard wiring practices when installing and operating this product.
Failure to do so could result in damage, injury and death.
AVERTISSEMENT! Pour éviter d'endommager la propriété et l'équipement, les blessures et la perte
de vie,respecter les codes électriques en vigueur et les pratiques de câblage standard au moment de
l'installation etde l'utilisation de ce produit. Dans le cas contraire, cela peut entraîner la mort, des
blessures graves ou des dommages.
WARNING! All service including inspection, installation, wiring, maintenance, troubleshooting, fuse
or other user serviceable component replacement must be performed only by properly qualified
personnel.
Service personnel must read this manual before proceeding with work. While service is being performed
un-qualified personnel should not work on the unit or be allowed in the immediate vicinity.
AVERTISSEMENT! Tous les services, y compris l'inspection, l'installation, le câblage, l'entretien,
le dépannage,le remplacement de fusibles ou d'autres composants pouvant être réparés par
l'utilisateur, doivent être effectués uniquement par un personnel diment qualifié. Le personnel de
service doit lire ce manuel avant d'effectuer tout travail. Pendant que l'entretien est exécuté, tout
Neut-Eng-REVO-C-3PH-300-800A-Thyristors-Units
REVO C
For more detail search for File E23578 on
5
User's Manual