Carriage Screen - Siemens SIJECT15 Operation Manual

SIJECT OP15B Screens

3.2.3 Carriage Screen

Operating sequences
Press the middle key to enter the carriage screen. See Fig 3-33.
The status of carriage advance and retract is displayed here, also the
mode of feeding.
Carriage advance (CarAdv) － set the pressure and flow of carriage
advance.
Carriage retract (CarRet)－ set the pressure, flow and time of carriage
retract. The time set here is used for monitoring the carriage retract. If
carriage does not retract to the end during this time, then it will send
alarm.
Feeding mode (Feed mode) － there are three modes for feeding: fixed,
front and back.
Fixed feeding: the carriage is fixed, first charging then decompression.
Front feeding: the carriage is at the front, first charging then
decompression, then the carriage will retract.
Back feeding: the carriage will retract first, then charging and
decompression.
Press
Press
3-42
Fig 3-33 Carriage screen
key to make carriage retract manually.
key to make carriage advance manually.
SIJECT 15/16 Operation Manual June, 2003