Siemens SIJECT15 Operation Manual page 64

SIJECT OP15B Screens
Fig 3-25
Operating sequences Press softkey F4
can be saved/loaded to/from MMC.
Program types --- User can select PLC, menus or CSP.
MMC PLC version --- displayed value. Press softkey F2 "PLC version"
to show the PLC version in MMC.
Operating examples To select Menus in Program types. Steps are as follows:
1. Press cursor key
2. Press Selection Key
3. Press cursor key
4. Press Enter Key to confirm.
Download Menus from MMC. Steps are as follows:
1. Plug in MMC card in the CI;
2. Select "Menus" in Program Type;
3. Press softkey F4
4. Restart the system after the transfer process is finished. The operation
is over.
3-30
Service screen 1.2 --- Save/load screen
to enter save/load screen. The PLC/menus/CSP
or to enter program type selection;
, and the cursor moves to the left;
or to select "Menus";
to start data transfer;
SIJECT 15/16 Operation Manual June, 2003