Siemens SIJECT15 Operation Manual page 75

SIJECT OP15B Screens
then advances again. It advances and retracts according to the set
numbers. Vibration mode: ejector advances and retracts to the set
position, then advances again. It advances and retracts according to the
set numbers. If this item is deselected, that means this machine does not
use ejector.
Ejector position (EjePos) － display the actual position of ejector
Ejection counter (Eje Count)－ when ejector multiple / vibration mode
is selected, users can set the numbers of ejection.
Press key to forward ejector to remove part from mold manually,
and press key to retract ejector manually.
SIJECT 15/16 Operation Manual 3-41