Table of Contents
Advertisement
Displaying field:
（1）
（2）
（3）
（4）
SIJECT 15/16 Operation Manual
when one small square indicator becomes light on, it means the
machine is working at the indicated step.
when a parameter block is not backlighting, it means this block
is allowed to be set; if a block is backlighting, then this block is
parameter displaying.
if the screen with cursor function selection, it is requested to
use the cursor first. Move the cursor to the wanted item, and
press the Selection key
key to select the function and use "Enter" key to confirm the
setting.
for the basic operating pictures, it is necessary to enter
password 1 to set parameters for the first power-on; or, after 5
minutes, users should input password 1 for the second time to
carry out parameters operation. For service picture (OEM),
password 2 must be input. Refer to section 3.1.10 "Service
screen" for password setting and changing.
SIJECT OP15B Screens
. Then press cursor up or down
3-7
Advertisement
Chapters
Table of Contents
