Siemens SIJECT15 Operation Manual page 52

SIJECT OP15B Screens
Mold open time (TmMldOpn) － The total time for mold open, which is
monitoring time. There is event message if the setting time is exceeded.
Carriage advance time (TmCarAdv) － The total time for carriage
advance, which is monitoring time. There is event message if the setting
time is exceeded.
Carriage retract time (TmCarRet) － The total time for carriage retract,
which is monitoring time. There is event message if the setting time is
exceeded.
Ejector advance time (TmEjeAdv) － The total time for ejector
advance, which is monitoring time. There is event message if the setting
time is exceeded.
Ejector retract time (TmEjeRet) The total time for ejector retract, which
is monitoring time. There is event message if the setting time is
exceeded.
Pre-decompression time (TmPreDec) － The total time for pre-
decompression, which is monitoring time. There is event message if the
setting time is exceeded.
Decompression time (TmDec) － The total time for decompression,
which is monitoring time. There is event message if the setting time is
exceeded.
Charging time (TmCha) － The total time for charging, which is
monitoring time. There is event message if the setting time is exceeded.
3-18 SIJECT 15/16 Operation Manual June, 2003