Siemens SIJECT15 Operation Manual page 27

Injection key
Press the middle Injection key to enter Injection screen.
Input corresponding parameter (pressure, position, flow and total
injection time) for injection.
Machine will inject once if you press the left key. Keep pressing the left
key, the machine will come into pressure holding status automatically
after injection is finished.
Machine will suck back, i.e., screw retract, if you keep pressing the right
key.
Charge key
Core 1 key
Press the middle Core 1 key to enter Core 1 screen.
Input corresponding parameter for core 1, such as position, pressure,
flow, time and counting.
Keep pressing the left key to let core 1 in.
Keep pressing the right key to let core 1 out.
SIJECT 15/16 Operation Manual
Press the middle Charge key to enter Charge screen.
Input corresponding parameter (Position, pressure and flow) for
charging.
Screw will be charging if you keep pressing the right key.
Operator panel keys
2-9