Siemens SIJECT15 Operation Manual page 73

SIJECT OP15B Screens
Fast mold open (MldOpn 2) －set the position, pressure and flow of fast
mold open.
Slow mold open (MldOpn 3) －set the position, pressure and flow of
slow mold open.
Mold open tolorence (MldOpnTol) －set the allowed tolorence of mold
open end position. When mold is within this tolorence, then the system
will consider the mold is opened to the end.
Mold position (MldPos) － display the actual position of the mold.
Press key to close the mold manually，and press key to
open the mold manually.
SIJECT 15/16 Operation Manual 3-39