Siemens SIJECT15 Operation Manual page 63

Password setting Press soft key F3
24 Service screen 1.1 --- password setting, and password can be set or
changed here.
Upper:
Higher password --- the highest level. The default value of this system is
xxxx (Please ask manufacturer), then confirm by Enter Key.
New Password 2 --- A new password 2 can be set here, then confirm by
Enter Key. The default value of this system is 2000.
Retype Password 2 --- retype the new password 2, and confirm it with
Enter Key.
When the password has been successfully changed, the screen will
display a message. Press Acknowledgment Key
operation.
Lower:
Higher password --- it is the password level 2. The default value of this
system is 2000, then confirm it by Enter Key.
New password 1 --- a new password 1 can be set here, then confirm by
Enter Key. The default value of this system is 1111.
Retype password 1 --- retype the new set password 1, then confirm it by
Enter Key.
When the password has been successfully changed, the screen will
display a message. Press Acknowledgment Key
operation.
SIJECT 15/16 Operation Manual
Fig 3-24 Service screen 1.1 – password setting
to enter the password setting screen. See Fig 3-
SIJECT OP15B Screens
to finish the
to finish the
3-29