3.1.6 Counter screen
Operating sequences
Press this key to enter the counter screen. See Fig 3-17 Counter screen.
Part count and part numbers for each mold can be set on this screen.
Part counter (Part Count) - Set the production quantity.
Part numbers for each mold (Part Nr/Mld) - Set the production
quantity for each mold.
Shots counter (Shot Count) – Display the number of shots.
Parts of this power on (Parts from Startup) – Display the production
quantity of current power on.
Softkey F1 - Clear shot. Press this key, and the injection time will be
reset.
Softkey F2 - Clear part. Press this key, and the part count will be reset.
SIJECT 15/16 Operation Manual
Fig 3-17
Counter screen
SIJECT OP15B Screens
3-19