Counter Screen; Function Screen - Siemens SIJECT15 Operation Manual

SIJECT OP15B Screens
Element
3-4
Indicator
Timing screen：
Display every set value and actual value of
timing.
Counter screen：
Display the set value of part count, and the actual
production quantity of this power on.
Function screen：
Select language, adjust the brightness and set
the back light function.
Load/save screen：
Load/ save mold number and parameters to/from
CI or MMC card.
Data screen：
Display the position and time during the latest 10
injections and cycles.
Service screen：
Display the service information for OEM, such as
linear scale, proportional valve, password, etc.
Mold open/close screen:
Set the process parameters for 3 mold
open/close modes.
Ejector setting screen:
Set the process parameters for 3 ejector
advance/retract modes, and ejector mode.
Carriage setting screen:
Set the process parameters for carriage
advance/retract, and charging mode.
Injection setting screen:
Set the process parameters for 4 injection modes/
3 pressure holding modes, and switch mode.
Charging setting screen:
Set the process parameters for 4 charging
modes, and back pressure selection.
Core 1 setting screen:
Set process parameters for core 1, and select
core 3.
Core 2 setting screen:
Set process parameters for core 2, and select
core 3.
Air blow setting screen:
Set parameters for air blow 1 / 2 .
SIJECT 15/16 Operation Manual June, 2003
Meaning