Chapter 3. Configuration
3.7.1.4
PROFINET Scanner Parameters (Module Parameters Tab)
The PNS has one module parameter:
By default, the PNS module LEDs will blink a fault code if a fatal error occurs. This can be changed to cause the
PNS to restart instead.
3.7.1.5
PROFINET Scanner Parameters (GSDML Tab)
The PNS module's GSDML Details tab displays the information from its GSDML file.
This information cannot be edited.
68
PACSystems* RX3i & RSTi-EP PROFINET IO-Controller User Manual
Figure 59: PNS Parameters Module Parameters Tab
Figure 60: PNS Parameters GSDML Details Tab
GFK-2571N