Figure 77: Third-Party I/O: Configure Ring Ports For Media Redundancy Manager - GE PACSystems RX3i User Manual

If the IO-Device will be a Media Redundancy Manager, edit the Ring Port settings as above. You can also change
the Default Test Interval in the range of 1 to 1000ms and the Test Monitoring Count (2 to 10). For the Media
Redundancy Manager, the Domain Name can be edited by typing over the default name.

Figure 77: Third-Party I/O: Configure Ring Ports for Media Redundancy Manager

3.8.1.3 IO-Device Parameters (Device Parameters Tab)
Additional Device Parameters tabs can be used to select additional device options, as defined by the device
manufacturer. Note: The exact names of the tabs and parameters are derived from manufacturer specific
information contained in the associated GSDML file. For example:
Figure 78: Third-Party I/O: Additional Parameter Settings (Product Dependent)
3.8.1.4 IO-Device Parameters (GSDML Details Tab)
The GSDML Details tab displays the device's GSDML parameters, which cannot be edited.
GFK-2571N May 2018
Chapter 3. Configuration
77