GE PACSystems RX3i User Manual page 52

2.7.3.1 SFP Modules for Ethernet Ports
Each Small Form-Factor Pluggable (SFP) cage on the bottom of a PROFINET Controller module can accept a:
•
10/100/1000 Mbps copper SFP,
•
100Mbps Single-Mode Fiber SFP,
•
100Mbps Multi-Mode Fiber SFP,
•
1000Mbps Single-Mode Fiber SFP, or
•
1000Mbps Multi-Mode Fiber SFP device.
SFP devices can be removed/replaced during module operation. The RX3i PROFINET Controller
supports the SFP devices listed below. An SFP type other than those listed below can be configured
as a GENERIC SFP in Proficy Machine Edition. The RX3i PROFINET Controller will attempt to operate
with a generic SFP that identifies itself as an Ethernet SFP. Since SFP types other than those listed
below have not been validated, correct operation cannot be guaranteed.
Wavelength
SFP Type
100BASE-FX
100BASE-LX10
1000BASE-SX
1000BASE-LX
1000BASE-ZX
10/100/1000BASE-T
GFK-2571N
Media Type
(nm)
1300 MMF
1300 SMF
850 MMF
1300 SMF
1550 SMF
- CAT5/CAT5e/CAT
6
May 2018
Core Size Modal
(µm) Bandwidth (MHz
– km)
62.5 500
50 400
50 500
9 -
62.5 160
200
50 400
500
9 -
9 -
- -
Chapter 2. Installation
Distance
(m)
2 – 2,000 (Full-Duplex)
2 – 400 (Half-Duplex)
2 – 10,000
2 – 220
2 – 275
2 – 500
2 – 550
2 – 10,000
2 – 70,000
100 (maximum)
41