Intel R2000WF Configuration Manual page 79

System
Drive Support
Configuration
12 x 3.5"
R2312WF...
6 Gb SATA all drives
12 Gb SAS all drives
PCIe NVMe SFF
drives 10 & 11 only
Intel® Server S2600WF Product Family Configuration Guide and Spares/Accessories List
SATA
Onboard Multi-port SATA
Ports
Onboard SATA controllers do
not support SAS expanders.
•
If attaching the onboard SATA
controller to the Backplane,
then use cables that are
included in the System SKUs.
•
For building block integration
use cable kits:
AXXCBL800HDHD
AXXCBL875HDHD
•
•
SAS + Expander
Mezzanine 12Gb SAS ROC
Module + 12 Gb SAS Expander
to Backplane (BP)
With 12 Gb SAS Expander With 12 Gb PCIe RAID and 12
RES3FV288 installed in Riser Gb SAS Expander RES3FV288
#1:
installed in
Use cables in Expander Kit to
Use cables in Expander Kit to
attach SAS ROC to Expander
attach PCIe SAS card to
Card
Expander Card
Use the following cables to
Use the following cables to
attach Expander to Backplane:
attach Expander to Backplane:
Expander  BP 0-3
Expander  BP 0-3
800 mm HD --– HD
800 mm HD --– HD
Expander  BP 4-7
Expander  BP 4-7
875 mm HD --- HD
875 mm HD --- HD
Expander  BP 8-11
Expander  BP 8-11
950 mm HD ---HD
950 mm HD ---HD
From data above, select
From data above, select
appropriate cable kits from list
appropriate cable kits from list
below:
below:
AXXCBL800HDHD
AXXCBL800HDHD
AXXCBL875HDHD
AXXCBL875HDHD
AXXCBL950HDHD
AXXCBL950HDHD
L6 systems ship with 1 each of
the cables listed.
SAS + Expander
12Gb SAS RAID PCIe* add-in
card + 12 Gb SAS Expander to OCuLink to Backplane (BP) drive
Backplane (BP)
PCIe SSD3 (CR)  BP SSD1 (CV)
riser #1: 600 mm
AXXCBL600CVCR
PCIe SSD2 (CR)  BP SSD0 (CR)
620 mm
AXXCBL620CRCR
*Retimer add-in card is not
compatible with R2312WFxxx
Up to 2 x NVMe
Cables for Onboard PCIe
bays 10 & 11 only
79